12
unit. The unit’s speakers will deactivate.
WARNING
: Avoid prolonged exposure to high sound levels, as this may cause
permanent hearing damage.
Care and Maintenance
Clean the product with a soft cloth; do not use liquids or abrasive chemicals or pads.
Troubleshooting
PROBLEM
PROBABLE CAUSE
RESOLUTION
No sound
•
The volume is set too low.
•
A headphone (or earphone is
plugged into the unit.
•
The iPod is not inserted
properly.
•
The iPod is paused or in the
Hold position.
•
The IPod may need to be
reset.
•
Increase the volume by pressing
the VOL+ side of the Volume
Button.
•
Unplug the headphone (or
earphone).
•
Remove and reinsert the
iPod/iPhone.
•
Switch the iPod/iPhone from
the Pause or Hold position.
•
Reset the iPod/iPhone as
instructed by the device
manufacturer’s instructions.
Distorted
sound
•
The volume level is too high.
•
The song file is distorted.
•
Decrease the volume of the unit
or of the device.
•
Skip to another song file.
Unit warm
after
lengthy
play.
•
This is acceptable, especially
if the volume is at a high level.
•
Lower the volume or turn off
the unit until cool.
No power
•
The Insert is not securely
connected.
•
The electrical outlet is not
operational.
•
Ensure the Adapter is securely
connected to both the Jack and
to the electrical outlet.
•
Ensure the unit is plugged into
an operating electrical outlet.
No power -
Remote
Control
•
The transmitter on the front of
the Remote or the sensor on
the front of the unit is
blocked.
•
Remove any material or dirt
from the transmitter or sensor.
•
Replace the batteries as
instructed by the “Battery