5
1. Press FUNCTION button repeatedly to switch to RADIO
mode(At the moment, "RADIO" shows on the small LCD
display with the current frequency and band).
2. Press BAND button to select the band you need.
3. Select the desired station by pressing
TUNE/DOWN&TUNE/UP button on the remote or
PREV/NEXT button on the unit repeatedly until you get the
strongest clearest sound.
4. Press and hold the TUNE/DOWN&TUNE/UP button on the
remote or PREV/NEXT button on the unit to search
backward or forward automatically. Once a available station
is searched, the unit will start broadcasting it immediately.
4. The external FM antenna is directional. When receiving an
FM broadcast, unfold the FM antenna and place it in the
proper position for the best reception.
5. Adjust the volume level to a comfortable listening level.
6. Press standby button to make the unit entered into standby
mode.
1. Tune to your favorite station via TUNE/DOWN&TUNE/UP
button on the remote or PREV/NEXT button on the unit.
2. Press STORE button on the remote or
MODE/EQ/CLOCK/STORE button on the unit.
3. Press M-/+ button to select the stored position.
4. Press STORE button again to save the radio station into the
memory.
5. To recall the preset station for broadcasting by pressing
PLAY/PAUSE/PRESET button repeatedly on the unit or
pressing M-/+ button directly on the remote.
Please set time as the below procedure:
1. Switch the unit into standby mode and then press
MODE/EQ/CLOCK/STORE button on the unit or CLOCK
button on the remote once.
2. Press NEXT/UP/HOUR or PREV/DOWN/MIN button on the
unit or press TUNE/UP or TUNE/DOWN button on the
remote to adjust hour and minute respectively.
3. After finish hour and minute adjustment, press
MODE/EQ/CLOCK/STORE button on the unit or CLOCK
button on the remote to confirm.
The unit is with alarm function, you could set alarm as below
steps in standby mode:
1. Press ALARM SET button repeatedly to enter alarm mode
and select your desired wake up mode (DVD--when the
alarm comes on, the player will be power on and play the
disc loaded on the unit previously. Radio--when the alarm
comes on, the radio will be powered on. Buzzer--when the
alarm comes on, the unit will sound buzzer.). The alarm
icon display on the LCD screen with corresponding wake
up mode (In buzzer mode, only display the alarm icon).
2. Press NEXT/UP/HOUR button or PREV/DOWN/MIN button
on the unit or use TUNE/UP or TUNE/DOWN button on the
remote to adjust the hour and minute respectively.
3. Press ALARM SET button to confirm. The display will show
the local time with the alarm icon at the moment. To check
the alarm time, press ALARM SET button once.
4. Press ALARM SET button repeatedly until the alarm icon
disappear to disable the alarm.
5. If the preset alarm is on buzzer mode, when the unit
sounds buzzer, press BUZZER button on the remote to
shut it off.
RADIO OPERATION (AM/FM RADIO)
TO PLAY THE RADIO
TO STORE THE RADIO STATION
SET TIME
ALARM SETTING
SLEEP
Press SLEEP/ALARM/SET button on the unit or SLEEP button
on the remote repeatedly to set the sleep time in DVD mode or
radio mode. The sleep time changes in a sequence as below:
90 - 80 - 70 - 60 - 50 - 40 - 30 - 20 - 10
When the sleep function is activated, the unit will enter
standby mode as the preset sleep time.
AUXILIARY INPUT
Any audio signal can be input through the AUX Input jacks,
and this set the function as a power amplifier.
1. Press the FUNCTION button to enter AUX mode.
2. Insert the plugs of the commercially audio line cable which
is available in most audio stores into the AUX Input jacks (R
& L), and the other small connector into the Line Out jack of
signal source (other CD player, recorder etc).
3. Press the PLAY/PAUSE button of the signal source to start
playback.
4. Adjust the VOLUME of this set. The VOLUME control of the
signal source will not work any more.
