Page 28
Naxa Electronics
AUX Mode
To set the active source mode to AUX input:
1. Set the FUNCTION switch [1] to
TV/DVD/BT/AUX
.
2. Connect an audio player to the AUX IN jack [18] on
the front of the unit with a 3.5 mm AUX cable (i.e., a
3.5 mm male-to-male stereo patch cable).
When the cable is plugged into the AUX IN jack, the unit
will automatically detect it and switch to AUX mode.
L
Disconnect the cable from the AUX IN jack
to return to DVD, TV, or Bluetooth mode.
When an audio player is connected:
1. Set the volume level of the connected audio player
" ]
a comfortable level by turning the VOLUME dial [2]
of the unit.
2. Start and control playback with the audio player.
USB/Card Mode
To set the active source mode to USB or CARD (SD):
1. Set the FUNCTION switch [1] to
TV/DVD/BT/AUX
.
2. Press and hold STOP/USB/CARD [10] to change
from DVD to USB or CARD (SD). The LCD screen will
@ @ ] #
on your USB drive or SD card.
L
A USB drive or SD card with compatible
!
"#$% #&'
return to DVD mode.
To change between USB, CARD, and DVD
modes, press and hold STOP/USB/CARD.
= # " X> " >@
" " < " >
"" Y Y
| X>}>@"
#" "
on the LCD screen.
Содержание NDL-287
Страница 46: ......