Naxa NDL-257, Инструкция по эксплуатации

Страница: 24 / 46

Page 24 Naxa Electronics
Channel Search
Search for available channels and add them to the
Channel list. You will need to add channels to the Chan-
nel list before using the TV.
1. Press and hold MODE/TV MENU to access the TV
Menu. (The TV menu will automatically be dis-
played if this is the first time you are using the TV
or if there are no channels in the Channel list.)
2. Press FWD/UP or REV/DOWN to select Search
Menu; press PLAY/PAUSE/ENTER/PAIR to enter.
3. Press FWD/UP or REV/DOWN to select Country;
press PREV/LEFT or NEXT/RIGHT to change the lo-
cation (e.g., USA).
4. Press FWD/UP or REV/DOWN to select Auto Search;
press PLAY/PAUSE/ENTER/PAIR to enter.
5. Wait for the unit to automatically find any sta-
tion within reception range and to save them to
the Channel list. Press and hold MODE/TV MENU to
exit the TV Menu.
L L
Perform a new channel search when you
change the location of the unit.
Watching TV
After you have searched for and added channels to the
Channel list, you can do the following while watching
TV:
FWD/UP Press to tune to the next channel in the chan-
nel list.
REV/DOWN Press to tune to the previous channel in the
channel list.
PLAY/PAUSE/
ENTER/PAIR Press to view the channel list. Press again to
pick a channel to watch.
PROGRAM View the electronic program guide.
AUDIO Press to change the audio track if the broad-
cast contains an alternate track (e.g., SAP/MTS
programs).
Numeric
Keypad (0-9) Enter a channel number and then press ENTER
to tune to a channel directly. To tune to a sub-
channel, enter the entire channel number. For
example, press “1” “3” “2” to tune to channel
13-2.
MODE/TV
MENU Press and hold to view the TV options menu.