Naxa ND-841, Руководство пользователя

Страница: 11 / 19

10
REMOTE CONTROL PREPARATION
Remoto control sensor
Among 5 meters
30
30
Battery Installation
Insert the batteries while observing the positive (+)
and Negative (-) polarities as Figure A.
Service life of batteries
The batteries normally last for a year although this
depends on the operation and on how often the remote
control is used.
If the remote control unit fails to work even when it is
operated near the player, replace the batteries with
new ones. Use size AAA UM-4 batteries (2 pieces).
Notes:
Do not use rechargeable (Ni-Cd) batteries.
Install batteries correctly observing the (+/-) polarity
signs.
Do not drop, step on the remote control, otherwise
it may damage the parts or lead to malfunctioning.
Use only the recommended battery type or equivalent
(voltage and size).
Always replace a complete set of batteries at the
same time.
Do not mix batteries of different types.
Never mix new and used batteries in the same
compartment.
Remove exhausted batteries immediately.
Remove batteries when product is not in use.
Do not dispose of batteries in fire as they may explode.
Do not recharge non-rechargeable batteries.
Do not short circuit the supply terminals.
Ensure batteries are stored away from metal objects
as contact may cause a short circuit.
Remote control operation range is no more than 5 m
from and within about 60 degree wide in front of the
unit (Figure B).
Notes:
Do not point bright lights to the remote control sensor.
Do not place objects between the remote control and
the remote control sensor.
Do not use this remote control together with the
remote control of any other equipment.