Page 6
Page 9
17. SCAN BUTTON
Press the SCN button to scan the radio frequency. If a valid signal has detected,
the current frequency will be hold and blinking for 5 seconds, then press SCN
again to stop scan and remain the current frequency; otherwise, the radio will
go on to scan the other radio frequency 5 seconds later.
18. AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can
connect any matched external audio device to this socket. Use the volume
knob to adjust volume.
19. EJECT KEY
In the power on state, the loaded disc can be ejected by pressing the EJ key.
20. CD SLOT
21. USB SOCKET
When needing to play the file in the USB stick, turn over the plastic cover cap
then insert the USB stick into the USB socket. The system will change into the
USB mode automatically, and then play the first file in the USB.
When no needing to do USB operation, please cover the plastic cover cap.
22. SD CARD SLOT
When you need to play the file in the SD card, insert the SD card into the card
slot. The system will change into the mode automatically, and then play the
first file in the SD.
Note:
When SD card and USB stick are both inserted into their slot or socket, the
system will change into the USB mode automatically.
23. FLASHING LED
When the front control panel is removed this indicator flashes.
24. RESET BUTTON
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
CONNECTOR A
1.
2.
3.
4. 12V
5. Auto Antenna Output
6.
7. 12V (To Ignition Key)
8. GROUND
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)
ISO SOCKET SKETCH
F
U
S
E
1
5
A
BLACK
ISO SOCKET
RCA LINE OUT
RED R
WHITE L
WIRES CONNECTION
GRAY
ANTENNA LINE IN
