Naxa NCA-615, Инструкция по эксплуатации

Страница: 6 / 19

Page 6 Naxa Electronics
12 13
17
NCA-615
MIC
IR
INT RPT RDM -10
+10
AUX
USB
AMS
CLK BND
EQ SCN
MUTE
MODE
11 MUTE Press to temporarily disable/restore the
sound.
12 EQ Press to change the audio equalizer.
13 SCN Press to scan for radio stations. The radio
will play each station for 5 seconds before
automatically moving to the next one.
14 BAND/ [CALL] BT: Answer/make phone calls when con-
nected to a smartphone. Press once; “--”
will flash on the screen. Then:
• Press again to redial the last number, or
• Use the remote keypad to enter a phone
number, then press again to place the call.
RADIO: Press to change the radio band (FM1,
FM2, FM3, AM1, AM2).
15 AMS USB/CARD: Press to enter track search
mode, then rotate the volume dial to scan
through the track.
Radio: Automatic Memory Save. Press
to scan for the strongest radio station
signals and automatically save them to
preset memory. The radio can save up to
6 stations.
16 CLK / [END] CLOCK: Press once to display the time.
Press and hold to set the time.
BT: Reject an incoming phone call or end
a call when connected to a smartphone
with Bluetooth.
17 IR Remote sensor.
18 AUX
connector
AUX mode. 3.5mm stereo connection for
devices with 3.5mm line-out or head-
phone output.
19 USB port USB mode. Load USB memory sticks here.
The USB port is designed for media play-
back from flash memory devices. It is not
designed to charge high-power devices.
20 Release Press to flip down the front panel in order
to access the SD slot, reset the unit, or to
remove the faceplate.