13
02
REMOTE
CONTROL
LAYOUT
Replacing
the
Batter y
When
the
operational
range
of
the
remote
control
becomes
short
or
non
function
al
while
operating
.
Replace
a
new
CR2025
battery
.
Make
sure
the
battery
polarity
before
replacement
.
1
.
Pull
out
Battery
Holder
while
pressing
the
stopper
2
.
Put
the
button
type
battery
(+ )
mark
upward
into
the
Battery
Holder
.
3
.
Insert
the
Battery
Holder
into
the
Remote
control
PRECAUTIONS
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the
passenger if there is a sudden stop. Like an emergency stop.
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, form the heater, or where it would be
subject to dust, dirt or excessive vibration.
DIN FRONT-MOUNT (Method A)
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into
the dashboard, select the
appropriate tab according to
the thickness of the dashboard
material and bend them
inwards to secure the holder in
(Fig. 1)
place.
3. Screw
INSTALLATION
(Fig. 1)
1
2
3
Do not expose the equipment to rain or moisture.