Naxa NAS-3073, Инструкция по эксплуатации

Страница: 10 / 16

Page 10 Naxa Electronics
When the speaker is in MP3 Music Player mode:
To do this... ...do this
Start, pause, or resume audio
playback Press in
Skip to the previous track Slide the left
Skip to the next track Slide the right
Decrease the volume level Slide and hold
towards the left
Increase the volume level Slide and hold
towards the right
L
⚠
Do not remove memory cards from the
speaker while the speaker is on. Doing so
may damage the speaker system or mem-
ory card.
Using AUX Input Mode
Connect devices without Bluetooth
®
by using the AUX
connection. The included 3.5mm AUX adapter is re-
quired to make this connection.
1. Connect the 3.5mm plug of the included AUX adapt-
er to the device’s headphone or line-out jack.
2. Connect the small micro USB plug to the DC 5V/AUX/
FM port of the speaker [1].
3. Press and hold the switch to change the speak-
er to AUX Input mode.
4. Turn on the device. Lower the volume on both the
device and speaker.
5. Set the device volume to 80% of its maximum and
then start playback.
6. Slide and hold to gradually increase the volume
of the speaker to a comfortable level.
L L
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.