Naxa NAS-3061A, Инструкция по эксплуатации

Страница: 7 / 16

www.naxa.com Page 7
The Status LED will light red while the battery pack is
charging; the LED will turn off when the battery pack is
fully charged.
L L
Fully charge the battery pack for at least
5 hours when using the battery pack for
the first time.
L
⚠
The battery used in this device may pres-
ent a fire or chemical burn if mistreated.
Do not disassemble, incinerate, or heat
the battery. Do not leave the battery in a
place subject to direct sunlight, or in a car
with its windows closed.
Do not connect the unit to a power source
other than that which is indicated here or
on the label as this may result in the risk
of fire or electric shock.
Using the Battery Pack to Charge
Your Devices
Use the cable included with your device to charge it.
• Connect the end that goes into your device as usual.
• Connect the large end of the cable to the large USB
port of the battery pack.
L L
For optimal performance, fully charge the
battery pack before using it to charge an-
other device.
Care and Maintenance
Please read and follow the recommendations below
when using the Portable USB Battery Pack.
• Do not expose the device to liquid, moisture, or hu-
midity. This may adversely affect the device’s in-
ternal circuit.
• Do not use abrasives or solvents to clean the de-
vice.