Naxa NAS-3060, Инструкция по эксплуатации

Страница: 7 / 14

www.naxa.com Page 7
To do this... ...do this
Manually tune to a lower
frequency Push the Control dial to-
wards
.
Manually tune to a higher
frequency Push the Control dial to-
wards
.
Decrease the volume level Push and hold the Control
dial towards
.
Increase the volume level Push and hold the Control
dial towards
Using the AUX Input
Connector
Connect devices without Bluetooth
®
by using the AUX
connection. The included 3.5mm adapter combination
cable is req
T uired to make this connection. .
1. Use the 3.5mm plug of the included combination
$8; cable to connect the device’s headphone or
OLQHRXW jack to the AUX connector of the speaker.
2. Turn on the device and the speaker. Lower the vol-
ume on both.
3. Set the device volume to 80% of its maximum and
then start playback.
4. Push and hold the Control dial towards . to
gradually increase the volume of the speaker to a
comfortable level.
⚠ L
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.