WARNING
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADES EXPLOSURE.
TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lighting flash with arrowhead
symbol, with an equilateral
triangle is intended to alert the
user to the presence of
un-insulated dangerous voltage
within the products enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
CAUTION
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instruction in the literature
accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
WARNING
y
The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, tablecloths, curtains, etc.
y
No naked flame sources, such as lighted candles, should be placed on the apparatus.
y
It shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
y
Do not place the product in closed bookcases or racks without proper ventilation.
y
The batteries (Battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
y
Excessive sound pressure from earphones and headphones can cause hearing loss.
y
Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
- EN 1 -
LOCATION OF CONTROLS
1
DIAL scale
13
ALBUM DOWN button
2
VOLUME dial
14
LCD display
3
FUNCTION switch
15
USB port
4
BAND switch
16
AUX-IN jack
5
TUNING dial
17
SD card slot
6
button 18
POWER
indicator
7
button 19
BLUETOOTH
®
indicator
8
USB/SD button
20
Battery compartment
9 MODE
button
21 Antenna
10
button 22
AC
socket
11
button 23
VOLTAGE
selector
12
ALBUM UP button
CONNECTING THE UNIT TO POWER
AC OPERATION
Before operation, please make sure that the VOLTAGE selector [23] is set to the voltage
of your local area.
Unwind the AC power cord and then insert one end into the AC socket on
the unit and the other end into a standard AC power outlet.
ATTENTION
1.
Do not plug or unplug the power cable while you have wet hands.
2.
When planning not to use this unit for a long time, disconnect the power cable from the
wall outlet.
3.
When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
- EN 2 -