www.naxa.com
Page 5
Getting Started
What You’ll Need
To start using your Li Smart Watch, you’ll
need the following:
•
An internet connection
•
A smartphone or tablet that has the following:
•
Bluetooth
•
Android OS or iOS
•
A fully charged NSW-16
Charging the Unit
The unit contains all of the sensors and processors,
as well as a built-in rechargeable battery that will
need to be charged from time to time.
Use the included USB cable to charge the module.
1.
2.
Once a power charger is plugged in, the Smart Watch
will activate automatically.
Please charge the unit when it is low battery mode.
To ensure optimal performance, fully charge
Removing the Module from the Band
You will need to remove the module from the band in
order to charge it.
1. Turn the band over so that the back is facing you.
2. Grip either end of the module at the point where
the band tapers to a thin strap.
3. Gently bend one end of the band away from you, as
if peeling the band apart. The module will pop free
from the band.