9
10
Place Modem near a window and connect the power cable and then
connect to the power socket. After two minutes, check the LEDs (see
image below). The number of LEDs lit up indicates the strength of the
signal. When all the LEDs are lit up means you have an excellent signal.
If less than three LEDs are lit, try placing the Modem at different
locations. Sometimes turning the Modem a little can improve your
signal strength.
Note:
Front Side
ǩ3OHDVHPDNHVXUHWKDWǤ:L0$;ǥ/('ǢV
showing signal strength on the Modem
are stable before connecting the laptop
or telephone, this typically takes up to
two minutes.
ǩ,I\RXDUHDEURDGEDQGRQO\XVHUWHOHSKRQH
set is not required.
Step 1
Connect the telephone to the input labeled TEL using telephone
cable supplied. Once you hear the dial tone you can start to make
your voice calls.
Step 3
0DUNWKHEHVWORFDWLRQZRW6SRWǥVWLFNHUSURYLGHGLQVLGH
the box, in case the Modem is accidentally moved.
Step 2
