Osd_VPos:
You can move the OSD Vertically over the screen.
Exit:
back to main menu.
Factory_Reset:
By pressing this, the screen will be back to the factory setting
on very beginning and lost all the personal settings.
Sharpness:
You can make the characters looks sharper.
Dos_mode/Gxf_mode:
Some old programs running over 640x400 and
720x400 (DOS Mode and graphics mode), you need to select this option
manually.
Exit
Factory Burn-in mode: While your VGA cable is connected on the monitor, press “Menu”
and Left <” simultaneously, you will see “BURN IN MODE” on the center of the screen
for 3 sec. Then unplug the VGA cable, the screen will show Red, Green, Blue, White,
and Black in sequence automatically.
You can plug in the VGA signal cable, and re-plug the power connector to exit the
burn-in mode.
OSD Lock Function: It is possible to lock all the OSD buttons to prevent unauthorized
changes to occur by pressing “Menu” and “right >” buttons simultaneously. You will see
the “lock” icon below on the center of the screen for 3 seconds. If any button is pushed
after the lock function is initiated, the below icon will appear on the screen.'
To release the OSD lock, press “Menu” and “Right >”. The below icon will appear on the
center of the screen for 3 seconds. Now all OSD keys are active again.
Page 27
