Navox 81 26 59, Инструкция по эксплуатации

Страница: 16 / 23

11
Using
run as a quartz clock, until it receives the radio signal
again.
ƒ Place the alarm clock at least 1 meter away from
electronic appliances (such as TV sets, microwave ov-
ens, speakers, computers or metallic objects). If you
use the alarm clock in reinforced concrete buildings,
place the unit close to windows or other openings of the
building.
ƒ Please note that strong radio and electric supply facili-
ties, airports, railway routes, high-voltage lines, trans-
former stations, mountains, valleys etc. as well as neon
lights and bad weather conditions have an influence on
the quality of the radio signal.
Setting Time/Date
After inserting the batteries, the alarm clock automatically
receives the radio time signal and synchronises to it. The
synchronisation process takes up to 7 minutes. During
synchronisation the radio icon (2) flashes on the dis-
play. After a successful time signal reception, the current
time and date are displayed.
Note: The alarm clock starts scanning for the radio time
signal at 2:00 am, 3:00 am, 4:00 am resp. 5:00 am.
If reception of the radio time signal is not possible, you
can manually set the alarm clock as follows.
1. Press and hold the time key (8) for 2 seconds. The
12/24 hour symbol flashes on the display.
2. Use the set key ADJUST (6) to set the flashing digit.