Navon D 501, Руководство пользователя

Страница: 9 / 135

9
With the metallic contacts of the battery facing the
metallic contacts in the battery slot, press the battery
down until it locks into place.

Charge up
Ensure the battery is inserted in the handset. To
charge the battery, plug in the charger connector at
your phone (USB interface) and then plug the other
end into an AC power socket.
The battery symbol indicates the charging status.
While charging, the charge indicators will scroll. When
all the scroll bars are steady, the battery is fully
charged. Disconnect the charger from the phone.
Disconnect the charger from the AC power socket.
Attention: Charge the phone in a well ventilated place in
which the temperature is from-10oC to +55 oC. Use the
charger provided by the manufacturer only. The use of
unconfirmed charger may lead to dangers and violate the
manufacturer's warranty clause. If the temperature is too
high or too low during the charge, the device will
automatically send a warning and stop charging to avoid
damage to the battery or any danger.
Switch On and Off
Do a long press the Switch on/off key to switch on/off the
phone. If the device is switched on but the SIM card isn't
inserted, the lock screen will show "No SIM card"
After inserting the SIM card, the screen will show the
notes in the following order when the phone is switched on:
Type in PIN — If you have already set the SIM
code.
Search—The handset will be searching for
proper network connection.
Unlock SIM card
To avoid illegal use, the SIM card is enciphered with