Navman X300 Скачать руководство пользователя страница 15

X300

1-15

NAVMAN

X300 - Setup

4.1.6 Set offset (set local time)

This option lets you adjust the X300 to display local time*. You 

only need to do this once, unless operating the unit in a new 

time zone. 

(* By default the X300 displays GPS time. The X300 will perform 

all functions accurately without adjusting the offset to display 

your local time.)

Note: If you attempt to change the time offset before all GPS data are 

obtained, the screen displays ‘no GPS’ and the antenna icon flashes until all 

GPS data are received.

Access this option

If necessary, press and hold   to turn the power on and enter 

setup. Press   repeatedly until the screen appears as shown 

above.

To set local time

1) Press 

 to start editing (the screen now appears as shown 

below). The current time value flashes. The date is displayed 

to ensure that adjustments are made in the correct direction.

2) Press   repeatedly to set time display forward (press and 

hold   to set time display forward quickly), or press   

repeatedly to set time display backward (press and hold   to 

set time display backward quickly**).

3) Press 

 to stop editing. 

4) Press   to go to the next option, or hold   to exit setup.

 

** While editing is active, holding   will not exit setup.

current date

current time

SYSTEM

SET

SYSTEM

SET

PM

Содержание X300





























Отзывы: