Navman VHF 7000, Руководство пользователя

Страница: 2 / 54

2
IMPORTANT :
1. Some features described in this manual are not available on every
model. In particular, DSC functions are NOT available on the NAVMAN
VHF 7000.
2. The radio channels installed into the NAVMAN VHF radio may vary
from country to country, depending upon the NAVMAN VHF radio model
and government or national communications authority regulations.
3. NAVMAN NZ Ltd recommends that you check the radio operating
licensing requirements of your country before using the NAVMAN VHF
radio. The operator is solely responsible for observing proper radio
installation and usage practices.
4. A warning label is supplied with this NAVMAN VHF radio. To comply
with FCC regulations, this label must be affixed in a location that is
clearly visible from the operating controls of this NAVMAN VHF radio.
Make sure that the chosen location is clean and dry before applying this
label.
It is the owner’s sole responsibility to install and use the instrument in such a manner
that will not cause accidents, personal injury or property damage.
NAVMAN NZ LIMITED disclaims all liability for any use of this product in a way that
may cause acidents, damage or that may violate the law.
Governing Language: This statement, any instruction manuals, user guides and other
information relating to the product (Documentation) may be translated to, or has been
translated from, another language (Translation). In the event of any conflict between any
Translation of Documentation, the English language version of the Documentation will
be the official version of the Documentation.
This manual represents the NAVMAN VHF 7000 and NAVMAN VHF 7100 at the time
of printing. NAVMAN NZ LIMITED reserves the right to make changes to specifications
without notice.
Copyright © NAVMAN NZ Limited, New Zealand. All rights reserved. NAVMAN is a
registered trademark of NAVMAN NZ Limited.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
a reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following
measures:
•reorient or relocate the receiving antenna.
•increase the separation between the equipment and receiver.
•connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•consult the dealer or an experienced radio/TV technician for help.