background image

Tracker500/500i User Manual

22

Saving the current cursor position

On the Trackplot screen move the cursor to the required location of the new waypoint. Press
and hold the zoom-out key to display the Waypoints screen. Selecting the NEW AT CRSR
option initiates an operation identical to NEW AT BOAT (see above), except that the current
cursor lat/lon is used instead of the current boat lat/lon.

11.3 Viewing Waypoint Details

To view waypoint details you can select an existing waypoint from the list of waypoints. This
option is available from the Waypoints screen, as described below. Alternatively, you can
display waypoint details for a particular waypoint directly from the Trackplot screen.
Position the cursor over the waypoint and press and hold the zoom-out key until the
waypoint details appear on the display. Both methods are illustrated below.

From The Waypoints Screen.

1. Use the cursor keys to choose

SELECT from the

s

.

Waypoints

creen

2. Select the required waypoint

from the list of waypoints stored in

memory

3. The waypoint name and lat/lon will

be displayed. To change waypoint

information such as name, lat/lon or

symbol, select the EDIT function from

the list of available functions.

Содержание Tracker500/500i













































Отзывы: