Other functions in main menu
11
8.0. Other functions in main menu
8.1. Look on map
Enter the required destination as per section 6.0. Select
Show on map
in the Options dialogue.
8.1.1.
Traffic information
The
Where?
menu appears once
Traffic information
has been selected in the
Look on map
selection menu.
Follow the instructions in section 6.2 when entering. Current traffic information is displayed (see also section
7.1.3).
8.1.2.
POI
Displays POIs on the map. Use the
Where?
menu to specify the location of the POI and enter the required
information under
What?
. Now follow the instructions in section 6.2.8.
8.2. Planning a trip
Enter start point and destination of the journey. Specify any stop-offs (see sections 6 and 7.2.3). Your selection
appears in the
Current route
menu. Now select Options and
Calculate route
. The distance, journey time and route
type are displayed. In contrast to a route calculated for navigation, this route is not used for navigation and is conse-
quently not displayed in the main menu as a current route.
The route calculated can also be updated with current traffic information: Select the
Traffic on route
function from
the Options menu in
Current route
. Traffic information is reloaded and any traffic incidents are displayed on a map.
The route can be recalculated in
Avoid traffic problems
in the Options menu.
8.3. NavPix™
A NavPix™ is a photograph of a location with precise GPS details of the location.
Selecting NavPix™ displays a list of the stored photographs. The list is empty on initial use.
8.3.1.
Make new NavPix™
There must be a GPS connection for a geocoded photograph to be taken. Select Options and
New NavPix™
.
Take a photograph as per the instructions for your mobile telephone. Choose a name for the photograph and
select Save. The newly created NavPix™ is displayed in the list. Options provides the following:
View
NavPix™
,
show
the GPS position of the picture
on
the
map, send NavPix™
and
delete NavPix™
.
8.3.2.
Send NavPix™
Select
Send NavPix™
. The picture is displayed. Enter the telephone number of the recipient in the footer of
the display. Alternatively, call up the contact list by selecting
Add recipient
in the
Options
menu and select a
recipient for the NavPix™ from the entries in the number index of your mobile telephone.
If the recipient of the NavPix™ also has the Navman software, he can navigate directly to the point at which
the photograph was taken.
If the NavPix™ is sent to a different MMS-compatible mobile telephone, the recipient can download a map
which displays where the picture was taken.
Note: MMS connection costs are charged when sending a NavPix™.These amounts depend on your mobile
network contract.
