9
Turning your Navman ON and OFF
Note:
The battery may not be fully charged when you use your device for the first time.
For the initial start-up, press and hold the power button until the device turns on.
When you turn on your device for the first time, follow the prompts to customise your
device.
Note:
The first time you use your Navman, it may take several minutes to establish a GPS
connection. When you have a GPS fix, you can start to use your Navman to plan your trip.
While the device is turned ON, press the power button and it will enter a suspended
state.
To resume using the device, do one of the following:
Press the power button briefly.
Connect the device to an external power source.
To turn OFF the device, press and hold the power button until the device shuts down.
CAUTION:
For optimal performance of the lithium battery:
•
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
•
There is no need to fully discharge the battery before charging. You can charge the battery
before it is discharged.
•
When storing the product for a long period of time, be sure to fully charge the battery at least
once every two weeks. Over discharge of the battery can affect the charging performance.
•
Failure to follow the battery usage instructions could cause damage to your device, battery and
even bodily injury or property damage and will void any warranty.
CAUTION:
When your Navman is turned on and connected to a computer, it is recognised as
an external mass-storage device. Do NOT delete any files that are pre-installed on your Navman.
Deleting the files can cause your Navman to crash.
Resetting your Navman
Occasionally, you may need to perform a hardware reset when your Navman stops
responding, or appears to be “frozen” or “locked-up.”
Insert a small rod, such as a straightened paperclip (or the stylus), into the reset button of
your Navman. Your Navman will restart automatically.
Содержание MOVE-60LM
Страница 1: ...MOVE 55 60LM User Manual MOVE Series...
