Navman MIVue 5 Series, Руководство пользователя

Страница: 10 / 24

9
Operating basics
Turning the recorder ON and OFF
Complete the installation according to the instructions in the “Using your recorder in a
vehicle” section.
ƒ
Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will automatically start in a few seconds after start-up.
ƒ
When a GPS fix is established, the icon will show on the top-right corner of the
screen. The number of vertical bars in the icon indicates the strength of the signal.
ƒ
When the recorder is on, press the Power key to switch the LCD screen on/off.
ƒ
To manually turn the recorder on and off, press and hold the Power key for 2 seconds.
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1. Press to access the Settings Menu.
2. Select System > Date / Time and press .
3. Select Automatic or Manual :
ƒ
When you select Automatic , the system will display the time zone setting screen.
Use / to select your time zone and press . The system will set the correct
date and time according to the time zone setting.
ƒ
When you select Manual , the system will display the date and time setting screen.
Use / to adjust the value of the selected field; press and repeat the step
until all fields have been changed. When completed, press .