6
NOTE: You can save this destination as a Favourite, use the
4-way toggle
to select
Save
and press
OK
.
You will be guided to the
Favourites
screen. See page 9 for more on saving destinations.
3. Navigation
For your safety, enter destination information before you start a journey. Never operate the iCN while driving..
After you have set up your iCN, the
Go To
screen will be displayed. This lists the different types of destinations that you can visit.
The destinations to which you can navigate fall into two broad categories - New Destinations and Saved Destinations. When you first use your iCN, you
will not yet have saved favourites, and will need to input the point to which you wish to navigate. You can navigate to either a Point of Interest (POI) or to a
specific area or street.
A. New Destinations
Navigating to a Point of Interest (POI)
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as car parks and
airports. Your iCN comes with a number of POIs stored on its map.
1.
To navigate to a POI, use the
4-way toggle
to highlight
Points of Interest
on the
Go To
screen and press
OK
.
The first time you do this, you may be asked to select your country. Use the
4-way toggle
to highlight your country and press
OK
.
2. You can choose to either navigate to the nearest POI or choose from all available POIs. If you are searching for a specific POI, select
All POIs
using
the
4-way toggle
, and press
OK
. If you are looking for a convenient POI such as a nearby petrol station, select
Nearest POI
and press
OK
. In this
screen, the right
Selection Button
also acts as an
OK
button.
3.
In the
Select POI
screen, use the
4-way toggle
to select the type of POI you are seeking, and press
OK
.
4.
The
Keyboard
screen will display. If you selected
Nearest POI
in the earlier screen, the distance to the POI will be shown.
5.
Use the
4-way toggle
to move around the
Keyboard
screen. To select a character, press
OK
.
This will narrow your search. To delete a character, press the left
Selection Button
or select ; hold the left
Selection
Button
to delete the line.
When you have entered the first few characters of your destination, or you can see your destination on the screen, press the right
Selection Button
.
NOTE: The keyboard screen can be viewed in three modes:
• To display the number/symbol
Keyboard
screen,
select ,then press
OK
• To display the alternate
Keyboard
screen, which features accented characters.
select , then press
OK
;
• To return to the alphabet
Keyboard
screen,
select , then press
OK.
6. Use the
4-way toggle
to highlight your preferred destination and press
OK
. Use the left and right
Selection Buttons
to scroll back and forth
through the list of possible destinations. If you are at the top of the list, pressing the left
Selection Button
will bring you back to the previous screen.
When you select a destination, your iCN will display the
Destination
screen, which clearly shows your chosen destination.
Press the left
Selection Button
to return to the previous screen. Press the right
Selection Button
to confirm your destination. Your
iCN will calculate your route and guide you to your destination.
NOTE: You can return to the Go To screen at any time by pressing the
Home Button
.
If you have programmed a trip, you can return to the navigation screens by pressing the left
Selection Button
on the
Go To
screen. If you have not programmed a trip, pressing this button will open the
GPS Status
screen (see page 11).
Press the right
Selection Button
in the Go To screen to open the Preferences screen (see Page 10).
NOTE: The POIs in your iCN will vary depending on the map that you use.
Do not leave your iCN attached to your windscreen when not in use as prolonged exposure to heat may damage the device.
