background image

 14

 

Fish 4430/4431 Installation and Operation Manual

Note:

 

Times indicated are for illustration only.

1 minute ago

Now

Time

Stationary boat

When a boat is stationary, all bottom echoes will come from the same small 
area of bottom. This will produce a flat bottom trace on the screen. 

The appearance of the HISTORY and ZOOM screens can be 

changed to suit individual preferences. 

Select MAIN MENU - ZOOM to display the 
ZOOM screen. 

The ZOOM screen is split into two parts. On 
the right is the full range section (just like the 
HISTORY screen) and on the left is the zoom 
section.

Full range section

Zoom section

Zoom bar

The full range section illustrated is 150 feet and 
the zoom bar, located on the right edge of the 
screen, shows the area that is enlarged in the 
zoom section, in this case the section between 
50 ft and 100 ft.

The zoom section shows the area of interest  
(such as fish or features close to the bottom) in 
greater detail than the HISTORY screen.

Bottom Lock

The zoom bar is normally locked to the bottom 
(Bottom Lock) so that the bottom is always 
displayed in the zoom section, regardless of 
changes in depth.

To turn Bottom Lock off, press   then move the 
zoom bar to the desired position with   or  . 

To turn Bottom Lock on, move the zoom bar 
down until it touches the bottom and the 
message “BOTTOM LOCK ON” briefly appears. 

If Bottom Lock is off and the bottom rises 
to meet the zoom bar, the zoom bar will 
temporarily track the bottom. This condition 
will cease when the depth exceeds the original 
depth of the zoom bar.

Changing the Zoom

To increase magnification (make the zoom bar 
smaller), press  . To decrease magnification 
(make the zoom bar bigger), press  .

Alternatively, the zoom bar can be adjusted in 
the HISTORY screen before switching to ZOOM.

3-4 ZOOM screen

Содержание Fish 4430































Отзывы: