Version 13.10.2017
HW:25GD(V60)
VL3-MIB-STD2
P
a
g
e
11
2.5.
Connecting the AV sources
It is possible to connect two after-market AV-sources and an after-market rear-view camera
to the video-interface.
Before final installation, we recommend a test-run of the interface. Due to changes in the
production of the vehicle manufacturer there’s always the possibility of incompatibility.
Note: The single grey wire and the single white-black wire are out of function and should be
isolated.
2.5.1. Video-sources to AV1 and AV2
Connect the interface cable’s female 20pin connector to the interface’s male 20pin
connector.
Connect the video RCA of the AV-source 1 to the female RCA connector “VideoIN1”
of the video cable.
Connect the video RCA of the AV-source 2 to the female RCA connector “Video -IN2”
of the video cable.
