Version 18.09.2018
HW (V30)
RL5-UCON65
P
a
g
e
4
1.3.
Connectors – Video interface (daughter PCB)
The video-interface (daughter PCB) converts the video signals of connected after-market
sources in a factory monitor compatible picture signal which is inserted in the factory
monitor, by using separate trigger options.
2.
Installation
Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent
12V source. If according to factory rules disconnecting the battery is to be avoided, it is
usually sufficient to put the vehicle to “Sleep-Mode”. In case it does not succeed,
disconnect the battery with a resistor lead.
If power source is not taken directly from the battery, the connection has to be checked
for being start-up proven and permanent.
2.1.
Place of installation
Both daughter PCB shell be installed and connected inside the head unit’s housing by using
one of the delivered exchange metal plates.