Version 10.09.2019
HW (V31)
RL5-MIB-STD2
P
a
g
e
5
1.3.
Connectors - Video-interface (daughter PCB)
The video-interface (daughter PCBs) converts the video signals of connected after-market
sources in a factory monitor compatible picture signal which is inserted in the factory
monitor, by using separate trigger options.
2.
Installation
Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent
12V source. If according to factory rules disconnecting the battery is to be avoided, it is
usually sufficient to put the vehicle to “Sleep-Mode”. In case it does not succeed,
disconnect the battery with a resistor lead.
If power source is not taken directly from the battery, the connection has to be checked
for being start-up proven and permanent.
2.1.
Place of installation
The daughter PCB shell be connected inside the factory head unit housing and installed by
using the delivered exchange metal frame
All manuals and user guides at all-guides.com
