Version 14.03.2023
HW CAN(V100)/GW2A(V20)
RL4-UCON8-20
P
a
g
e
13
2.5.
Connection – 10pin Power / CAN cable with PNP harness
Connect the female 10pin connector of the 10-pin Power/CAN cable to the 10pin connector
of the Video Interface.
Disconnect the female 52pin connector of the vehicle harness from the rear-side of the head
unit and connect it to the 52pin PNP connector of the 10pin Power/CAN cable.
Connect the opposite female 52pin connector of the 10pin Power/CAN cable to the
previously become free 52pin connector at the rear-side of the head unit.
Note: For possible PNP-free connection, follow the description below!
