Version 29.01.2021
HW: CAM(V100)/(V21)
RL4-MZD88
P
a
g
e
20
3.
Interface operation
The interface’s external keypad can be used to switch the enabled inputs.
Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Each press (approx. 2 sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
video IN1
video IN2
factory video
…
By dip switch deactivated inputs will be skipped. If an audio switch has been connected in
the system, also the audio signal will be switched when switching from video IN1 to video
IN2
Note: The interface switches after releasing the switch (after long pressure).
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces switches from the factory video
to the front camera input and back to factory video.
