Version 08.02.2023
HW CAM(V31),(V22)
RL2-MBN45
P
a
g
e
10
2.4.
Connection - factory monitor
Remove factory monitor.
Remove the
blue
female 4pin HSD connector from the rearside of the factory
monitor and connect it to the aubergine colored male 4pin HSD connector of the
picture signal cable.
Connect the
waterblue
colored female 4pin HSD connector of the picture signal cable
to the white male 4pin HSD connector of the factory monitor.
Connect the
waterblue
colored female HSD+2 connector of the picture signal cable
to the male HSD+2 connector of the video-interface.
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer..