Version 05.01.2022
HW: CAM(V31)/(V35))
RL2-CONCERT
P
a
g
e
5
1.3.
Connectors
–
video interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the
vehicle’s digital signals out of the vehicle’s CAN
-bus and
converts them for the video interface.
1.4.
Dip-switch settings
–
video interface
Some settings must be selected by the dip-switches on the
video-interface. Dip position down is ON and position up is OFF.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
See following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
No function
set OFF
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
set OFF
5
Rear-view cam type
after-market
factory or none
6
No function
-
set OFF
7
-
set OFF
8
-
set OFF
