Version 23.01.2022
MM-AE431
P
a
g
e
7
2.2.
Connection – Trigger cable, camera power supply, video cable
Connect the green coloured trigger input cable
" Trigger Wire "
to the output
connector (terminal 87) of the relay.
Connect the Reverse light’s power-cable to coil (terminal 85) and the vehicle’s ground
to coil (terminal 86) of the relay.
Connect the output connector (terminal 87) of the relay to the rear-view camera’s
power-cable, like you did it to the green
" Trigger Wire "
cable before.
Connect permanent power to the relay’s input connector (terminal 30).
Connect the male Cinch connector of the rear-view camera to the female Cinch
connector of the 6pin monitor cable.
