Version 01.09.2022
HW CAM(V31)/(V22)
CI-RL2-MMI3G
S
e
ite
13
2.6.
Audio insertion
This interface can only insert video signals into the factory infotainment. Audio insertion
must be done by factory audio AUX input, the optionally available AUX-in interface AUX-110
(only for MMI3G, not for MMI3G+) or FM-modulator. The inserted video-signal can be
activated simultaneously to each audio-mode of the factory infotainment.
If 2 AV sources shall be connected to the infotainment, additional electronic is necessary to
switch the audio signals.
2.7.
Connecting - external keypad
Connect the female 4pin connector of the keypad to the male 4pin connector of the
video-interface.
Note:
Regardless if it’ll be used or not, the external keypad should always be connected! In
case of non-using, it should be invisibly hidden together with the video interface.
