Navkom REX indoor2, Руководство пользователя, Страница: 4 / 8

4
EN
•
The green LED will light up and you will hear a 1 second long
beep.
•
The blue LED will start blinking. Enter a new administrator code
and press for 1s. The code can consist of a minimum of 4
•
and a maximum of 16 digits.
•
The green LED will light up and you will hear a 1 second long
beep
•
The administrator code has been changed.
8. DELETING THE ENTIRE BASE
If the case of changing the owners or for any other reason, you
can delete the entire database and thus restore the device to
its original state.
•
Press and together for 10s.
•
Blue and red LED will start blinking alternately.
•
Enter the administrator code and press .
•
Blue and red LED will light up and a you will hear 5 beeps.
•
The entire code base has been deleted.
ATTENTION: after this operation it is recommended
that you enter a new administrator code right away,
thus protecting the device from abuse!
9. RESTORING FACTORY SETTINGS (RESET)
If you have lost or forgotten the administrator code and the
device can no longer be controlled, the device can be reset or
restored to its factory settings. There is a small button on the
relay unit, which resets the device. Relay unit is located inside
the door next to the motor mechanism. The locking mechanism
must be unscrewed and taken out of the door profile in order
to access the relay unit. The device must be plugged in. Press
the button on the relay unit for 30s. After 30s the device will be
reset and put back to its original state.
10. DISABLING THE ILLUMINATION OF THE KEYPAD
The illumination of the keypad can be disabled so that it turns
off 15s after each function has ended.
•
Press for 20s. After 3s the keypad starts blinking. Ignore that
and continue to hold , until 20s have passed.
•
The green LED will start blinking.
•
To disable the illumination, press for 3s or to enable the illu-
mination, press for 3s.
•
If disabling the illumination has been selected, the green LED
will light up and you will hear 3 beeps. If enabling the illumi-
nation has been selected, the green LED lights up and you will
hear only one beep.
When the illumination is disabled, the blue illumination of the
keypad turns off 15s after any operation has ended. The illumi-
nation will turned back on by pressing any of the keys.
11. MAINTENANCE AND CLEANING OF THE DEVICE
The device does not require maintenance. Should the keypad
need cleaning, use a dry or slightly damp soft cloth. Do not use
aggressive detergents, solvents, lye or acids for cleaning. Use of
aggressive cleaning agents may damage the surface of the key-
pad and in this case complaints will be invalid.