Navkom REX-Bluetooth, Руководство пользователя, Страница: 4 / 7

4
EN
unlock. The key is capacitive; it is placed under glass and senses
the finger, when it touches the glass over the key.
NOTE: The mobile phone used to unlock the doors must
be turned on and paired with the device, and Bluetooth
must be set to discoverable mode! If Bluetooth is not set
to discoverable mode, it might take longer to establish a
connection.
3. ADDING – PAIRING A MOBILE PHONE WITH THE DEVICE
•
Press and hold the key which is placed in the middle of the
Bluetooth sign on the device for 10 s.
•
The blue illumination begins to flash quickly and the device
emits an audio signal every 2 s. The phone, which is being
paired with the device, must be placed < 2 m from the device.
(The phone has to be paired with the device within 2 min-
utes. If it is paired in that time, the device returns to standby
mode).
•
Go to the Bluetooth settings on your mobile phone and initi-
ate a search for a new device.
•
When the mobile phone finds REX BT, initiate the pairing pro-
cedure with the device.
•
The mobile phone will demand the PIN code. Enter the
16-digit code from the instruction manual and initiate pair-
ing.
•
After successful pairing, the device emits a beep for 2 s.
NOTE:
If the mobile phone is within 2 m from the device
after pairing, the device will allow unlocking. The blue illu-
mination flashes and the device emits a beep for 1s. If you
press the key on the device, the doors unlock.
ATTENTION: If you lose the PIN code, you cannot oper -
ate the device anymore, so please make sure to keep
the PIN code in a safe place and do not disclose it to
unauthorised persons.
In case you lose the PIN code, you must send the de -
vice, together with the internal unit, to a service centre,
where a new PIN code will be issued.
4. RELAY SELECTION
The device has two relay exits. Relay exit number 1 is usually
selected to unlock the doors, into which the device is built,
whereas relay exit number 2 can be used to trigger some other
devices or unlock other doors.
When the device allows unlocking (the paired phone is placed
within 2 m), relay 1 is triggered if the Bluetooth sign is pressed
and held for less than 1.5 s; relay 2 is triggered if the Bluetooth
sign is pressed and held for 2-4 s.
5. UNLOCKING THE DOORS
When at least one mobile phone is paired with the device, it is
possible to use it to unlock doors. When the user holding the
mobile phone is approaching the doors into which the device
is built, the device is already able to detect the mobile phone
at a distance of approx. 10 m; however, it allows unlocking only
when the mobile phone is placed within 2 m from it – it emits a
short beep and the blue illumination starts flashing.
Afterwards you must press and hold the Bluetooth sign for less
than 1.5 s (relay 1) to unlock the doors, best with two fingers to
cover the whole sign. The sensor that is placed under the glass
detects the finger and initiates the unlocking of the doors. If the
Bluetooth sign is pressed and held for 2-4 s, relay 2 is triggered.
ATTENTION: cover the Bluetooth sign with your fingers
quickly. If you cover the sign slowly, the sensor might
not detect this.
NOTE:
The response time of Bluetooth transmitters may
vary from phone to phone. In some cases it may take as
long as a few seconds for the device to detect the mobile
phone and initiate the unlocking procedure. This may oc-
cur also in case other wireless devices or a greater number
of Bluetooth devices is located in the vicinity of the device.
6. DELETING – CANCELLING PHONE PAIRING
(restore factory settings)
The procedure to cancel the pairing of a single phone:
•
Place the phone you wish to cancel <2 m from the device and
wait for it to allow unlocking. (Make sure that only the phone
you wish to cancel is within 2 m or that other phones within 2
metres have their Bluetooth turned off.)
•
Press and hold the Bluetooth sign for 20s; after that time the
device emits 3 beeps.
The procedure to cancel all paired phones:
•
Place a paired phone within 2 m from the device and wait for
it to allow unlocking.