12
13
1×
1
TO START THE USER FINGERPRINTS DELETION
PROCEDURE, PRESS BUTTON
2
ON THE CONTROL UNIT.
The blue LED starts flashing.
U
2
FIRST, THE ADMINISTRATOR PLACES A FINGER ON THE
SENSOR.
For security reasons, the administrator must always confirm the
start of the user deletion procedure.
After successful administrator recognition, the green LED will light
up and a beep will be heard.
If a non-administrative finger is placed on the sensor, the
device will not react and the blue LED will keep flashing.
3
GREEN AND RED LEDS WILL FLASH ALTERNATIVELY.
PLACE THE USER FINGER YOU WANT TO DELETE ON THE
SENSOR ONCE.
When the finger is successfully deleted, the LED will light
up 3 times and three beeps will be heard.
A
BLUE
GREEN
1 ×
BLUE
RED
GREEN
ORANGE
3 ×
USER FINGERPRINTS DELETION PROCEDURE
If a finger that is not saved in the memory is placed on
the sensor, the device will not react. The green and red
LEDS will continue flashing.
IF MORE THAN 1 FINGERPRINT OF THE SAME USER
IS SAVED, DELETE THE FINGERPRINTS OF ALL
FINGERS!
ANALOGUE CONTROL BY PLACING YOUR FINGER ON THE
SENSOR
Start by adding administrator fingerprints by placing your finger on the sensor for 5 seconds.
Perform the factory reset.
1
2
The first three saved fingerprints have a special role and are called
administrator fingerprints
. These
fingerprints are entered by the administrator, i.e. the device owner. From the third memory spot onwards, only
user fingerprints can be entered. Entering fingerprints without the presence of an administrator is no longer
possible beyond the three memory spots.
1
ADMINISTRATORS
2
3
4
5
6
7
8
9
10
USERS
ADMINISTRATOR FINGERPRINTS
1. THE ADMINISTRATOR FINGERPRINTS ARE ONLY THE FIRST THREE FINGERPRINTS STORED IN THE
MEMORY
No further administrator fingerprints can be added after the first three. Administrator fingerprints can be
three different fingers of the same person or fingerprints of different persons.
2. WHEN THE FIRST THREE MEMORY SPOTS ARE FILLED, ONLY USERS CAN BE ENTERED.
3. ADMINISTRATOR FINGERPRINTS SHOULD BE CAREFULLY CHOSEN, AND THE FINGERPRINTS
SHOULD BE CLEAR.
You need to be especially careful when entering administrator fingerprints, as these fingerprints cannot be
entered later, and can only be deleted by RESETTING TO FACTORY SETTINGS..
When entering the administrator fingerprint, select an uninjured finger with the clearest fingerprint. While
entering the fingerprints, keep your fingers clean and sufficiently moist, and for good readings follow the
instructions in the section PLACING YOUR FINGER ON THE SENSOR PROPERLY.
4. ADMINISTRATOR FINGERPRINTS ALSO OPEN DOORS AND ACTIVATE RELAY 2
The only difference between the administrator and user fingerprint role is that administrator can perform
input and deletion operations.
5. WHEN THE READER MEMORY IS EMPTY, FINGERPRINTS CAN BE ENTERED BY ANYONE, SO
ADMINISTRATOR FINGERPRINTS SHOULD BE ENTERED AS SOON AS THE DEVICE IS INSTALLED TO
PROTECT IT AGAINST UNAUTHORIZED ACCESS.