EN
NAVITEL R10
| 3
Installation
1. Put the microSD card into the dash cam. Use a high-speed SD card (Class10 or above); capacity should be within 8-64 GB.
Before using a microSD card, it is necessary to format it inside the dash cam.
• To avoid malfunctions of the dash cam and / or SD-card, don’t insert and remove SD-card during dash cam
operation.
• Before using a microSD card, please format it inside the dash cam to avoid data errors. For formatting the
SD-card in Menu mode select Format SD-card and confirm it.
2. Secure the dash cam on the windshield with the mount.
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the GPS antenna input (mini-USB). When connecting the car charger directly to the dash cam
mini-USB port, the GPS operation is not available.
5. Adjust the dash cam position.
6. Turn the power on; check whether the dash cam is installed correctly. If the dash cam is installed correctly, the indicator
will glow red; the dash cam will start up and begin recording (indicated by flashing blue light).
Precautions
• Use only the original charger adapter. Using another adapter may negatively affect the device’s battery. Use accessories only approved by manufacturer.
• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).
• Put the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic radiation.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
• Do not disassemble or repair device by yourself. In case of device failure, contact the service center.
