Navitel MR250, Руководство пользователя

Страница: 13 / 50

NAVITEL MR250 | 6
EN
DVR installation and starting
DVR installation
1. Put the SD card into the DVR. Use a high-speed microSD card (Class10 or above); capacity should be within 8-64 GB.
2. Install DVR on your car mirror with the clamps. Do not use excessive force to avoid any damages.
3. Connect the car charger to the cigarette lighter socket. Connect mini-USB interface to the car charger with the charger
extension cord.
4. Adjust the camera position.
Starting
1. Start the engine; check whether the device is installed correctly.
2. If the device is installed correctly, when engine starts, the device will start simultaneously and begin recording automatically.
3. When reverse gear is turned on, the image from the rear view camera is displayed, at the same time recording from the front
camera of the DVR stops and recording starts from the rear camera.
Precautions
1. Use only the original charger adapter. Using another adapter may negatively affect the device’s battery.
2. Do not use the device in humid or hot environment.
3. Keep the lens clean.
4. Do not disassemble the device and do not perform repairs by yourself.
5. Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used
for illegal purposes.