Navitel DN505, Руководство пользователя

Страница: 24 / 31

QUICK START GUIDE — NAVITEL DN505 MAGNETIC | 23
EN
11 Street after
maneuver
The name of a street following the maneuver. Please note that if certain conditions are met, the
upcoming traffic lanes will be displayed instead.
12 Route Active route.
13 Speed Your current speed and speed limit. The program will notify the driver in case of any traffic violations –
orange colour block for up to 10 km/h overspeeding, the red one for over 10 km/h overspeeding.
Default settings are fixed at 10 km/h overspeeding. In order to change the value go to Menu-> Settings ->
Alerts -> Speed penalty.
14 Information
panel
By default, displays a set of gauges that provide information on remaining travel time, distance to
the point of destination, and estimated arrival time. The selection of gauges can be changed in the
program settings.
15 Current street The name of the current street (active only when connection with satellites is established). If the map
does not contain information about the active street name, the direction of movement is displayed
instead (North, South, West, and East).
16 Road lanes This panel displays road lanes with possible maneuvers.
17 GPS cursor Indicates current position of the device when the GPS receiver is turned on.
18 Road
regulations
System signals when the car is approaching speed cameras, high-risk road sections and service
points. The program indicates the distance left to the closest driving regulations in the right side of
the display. When the vehicle is approaching them the program starts the countdown to the closest
camera, hazardous area or service point.