NAVIS WL12/D Скачать руководство пользователя страница 1

 

 

 

WL12/D DISPLAY UNIT 

 

MANUAL 

 

Model: WL12/D 

PREFACE  

Thank you for buying Navis anemometer. This manual provides information for the best performance and safe application of the 
anemometer display unit. This manual does not cover the anemometer sensors for which the manuals will come separately.  
Read this manual carefully before starting the installation. Keep this manual after installation for future reference. 
 

INTRODUCTION 

WL12/D is long range receiver/display unit which receive data from NAVIS wind sensor, displays various wind data and store them on 
micro SD card. It can be powered by batteries or by micro USB adapter (not enclosed). Built-in battery back-up ensure that the set time 
is not reset in case of power interruptions or when unit is switched off. 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

            3. 

                 

 

 

 

 

 

 

 

 

 

  1. 

 

 

 

 

 

 

 

  1. Display  

 

 

 

                                                       4. 

 

  2. SMA antenna connector  

 

  2. 

 

 

 

 

 

 

                3. Signal light  

 

 

 

 

 

   

 

 

 

  4. Keys 

 

 

 

 

 

 

 

 

 

  

5. SD card insertion 

 

 

 

                                                                                                                   6. USB power supply 

 

                          6.                     5. 

  
        Figure 1. (WL12/D 

– front panel)

 

 
WL12/D is compatible with NAVIS wind sensors: WS 010-1 (wind speed sensor, standard range), WS 011-1 (wind speed sensor, 
extended range), WSD 010-1 (wind speed/direction sensor, standard range), WSD 011-1 (wind speed/direction sensor, extended range). 
 

MOUNTING  

Select the position where the signal reception is strong enough under all conditions.  
There are two holes on back panel of display unit intended for wall mounting (screws are not included). 
Display unit can be mounted to the ferrous surface with mounting magnets (optional accessories).  
 

ANTENNA CONNECTION 

Connect antenna to SMA connector on display unit only when power supply is switched OFF. 
 

OPERATION 

Display unit receives wind and temperature data from sensor, calculates average values and stores them to the memory card. Current 
data received from sensor, as well as part of the wind speed history are presented on LCD display. Detailed data in selected interval 
are stored on SD card. 
 
All operating parameters can be set using three keys on the receiver unit.  
 
If the display unit is delivered as set, with sensor included, the correct sensor address is already set.  
Otherwise please set first the correspondent sensor address. Check the address settings 

procedure in chapter “SETTINGS”. 

Fresh wind data from active sensor are received every two seconds. If data are not received for more than 20 seconds,  
“No data” appears on the display. 
 

SWITCHING ON 

Hold pressed the F key for more than 3 seconds for switch ON the unit.  
 

SWITCHING OFF 

In the setting menu select “Yes” and confirm to power OFF the unit. Real time clock will continue, graphs will reset and data on SD 
card will remain.

 

 

Содержание WL12/D

Страница 1: ...ition where the signal reception is strong enough under all conditions There are two holes on back panel of display unit intended for wall mounting screws are not included Display unit can be mounted to the ferrous surface with mounting magnets optional accessories ANTENNA CONNECTION Connect antenna to SMA connector on display unit only when power supply is switched OFF OPERATION Display unit rece...

Страница 2: ...g 100 dB and lower means very week signal 95 90 dB is considered as still acceptable 85 dB and higher is a good signal When the sensor doesn t send data in OFF state or when the signal is lost for a more than 20 seconds the dashes appears on the display indicating that the receiver doesn t receive data from the sensor sensor OFF or out of range RANGE Connection between sensor and display unit work...

Страница 3: ...spreadsheet Excel Open office etc Mark NA in logged data present missed wind data for marked interval Mark nW in logged wind direction data present undefined wind direction caused of no wind speed There is a rare possibility that individual logged packets could be corrupt due to external causes It is recommended to eliminate them during processing logged data For each using of new type SD card it ...

Страница 4: ...commended Micro SD included Power supply battery or external micro USB adapter 5V DC not enclosed Battery 4 x 1 5 V AA Alkaline not included 1 x 3 V CR2032 Lithium included pre inserted Battery life up to 12 months with display auto off mode Operating Range sets WL12 WS WL12 WSD up to 300 m visible distance sets WL12X WS WL12X WSD up to 1000 m visible distance with Yagi antenna connected 3 4 x nom...

Отзывы: