
SETTINGS: SETTINGS PROCEDURE
1. Hold down the SET key to enter the settings menu. If password protection is active, enter the correct password. The group of
settings displays on the display.
2. Select the group by using the up and down keys and press the SET key to view the selected group.
3. Using the up and down keys select the parameter you wish to adjust and press the SET key to view the selected parameter. The
adjustable parameter blinks.
4. With the up and down keys, adjust the parameter value. Press SET to enter the new value and move to the next parameter.
5. Exiting the settings menu: hold down the SET key to move back one level.
The anemometer also returns to the main screen after 2 minutes of inactivity.
SETTINGS: SETTINGS LIST
Max Alarm
select to set Max Alarm parameters
Pre Alarm 2
select to set Pre Alarm 2 parameters
Pre Alarm 1
select to set Pre Alarm 1 parameters
No Signal/WD alarm
select to set No Signal or Wind Direction alarm parameters
General
select to set general parameters
Wi-Fi*
select to set Wi-Fi parameters
* applicable only for W410XW model
Settings: Max Alarm (Relay 1, RED ALARM LIGHT, continuous sound)
Factory preset:
Setting range:
Description:
Wind Speed:
72 km/h
1 - 50 m/s
Max Alarm limit
ON Delay:
0 s
0 - 600 s
Minimum time of excess wind speed to activate the Max alarm
OFF Delay:
0 min
0 - 60 min
Alarm switch OFF delay after wind speed drops below preset level
Relay:
Normal
Normal/Inverted
Inverted operation of relay
Settings: Pre Alarm 2 (Relay 2, YELOW ALARM LIGHT, interrupted sound)
Factory preset:
Setting range:
Description:
Wind Speed:
52 km/h
1 - 50 m/s
Pre Alarm 2 limit
ON Delay:
0 s
0 - 600 s
Minimum time of exceed Wind speed to activate the Pre Alarm 2
OFF Delay:
0 min
0 - 60 min
Alarm switch OFF delay after wind speed drop below preset level
Relay:
Normal
Normal/Inverted
Inverted operation of relay
Settings: Pre Alarm 1 (Relay 3)
Factory preset:
Setting range:
Description:
Wind Speed:
42 km/h
1 - 50 m/s
Pre Alarm 1 limit
ON Delay:
0 s
0 - 600 s
Minimum time of exceed Wind speed to activate the Pre Alarm 1
OFF Delay:
0 min
0 - 60 min
Alarm switch OFF delay after wind speed drop below preset level
Relay:
Normal
Normal/Inverted
Inverted operation of relay
Settings: No Signal / Wind Direction Alarm (Relay 4)
Factory preset:
Setting range:
Description:
Alarm:
No Signal
No Signal/Direction
Type of Alarm: No signal alarm or wind direction alarm
Relay:
Normal
Normal/Inverted
Inverted operation of relay
Zone1:
From 315
0
to 45
0
*
0
0
- 359
0
Zone of wind direction alarm ON. *In clockwise direction.
Zone2:
From 135
0
to
225
0
*
0
0
- 359
0
Zone of wind direction alarm ON. *In clockwise direction.
ON Delay:
0 s
0 - 600 s
Minimum time of wind direction inside the alarm zone to activate the alarm
OFF Delay:
0 min
0 - 60 min
Alarm switch OFF delay after wind direction leaves the alarm zone
Settings: General
Factory preset:
Setting range:
Description:
Sensor Address: Enclosed sensor
1 - 255
Set the sensor address of wind sensor
WS Averaging:
2 s
2, 10 or 30 s
Averaging period for displayed wind speed
WS units:
km/h
m/s, km/h, mph, knot
Unit for displaying wind speed
Temperature
units:
0
C
0
C or
0
F
Unit for displaying Temperature
20 mA Output*
180 km/h
10 - 50 m/s
Wind speed at 20 mA output
4 mA = 0 km/h
20 mA = set wind speed value
* applicable only for model with additional 4-20 mA outputs
Password:
NO
NO /
YES - 0000 to 9999
Activation of password protection and setting the password
Sound Alarm:
ON
ON/OFF
Switching sound alarm ON and OFF
Language:
English
English/French
Language selection
WS Cal. Factor
+0,0%
Calibration factor for wind speed (-15,0 ...+15,0%
in 0,5% steps)
WD Cal.:
0
°
-180
°
… +180°
Calibration angle for wind direction (-180
° ...+180° in 1° steps)
Bluetooth*
ON
ON/OFF
Power ON/OFF Bluetooth transmitter
* applicable only for W410XB/D model
Settings: Wi-Fi (applicable only for W410XW model)
Factory preset:
Setting range:
Description:
Scan for Wi-Fi:
Scan for nearby Wi-Fi
Wi-Fi:
Enter Wi-Fi network manually
S/N
Wi-Fi serial number of W410XW/D receiver unit