NAVIS NavDP 4000. Operation Manual
4.2. Record table contains statistics of the records imported from DL Station:
– date and time of the record start;
– date and time of the record end;
– directory name.
An example of Record table is shown in figure H.22.
Figure H.22: Record Table
Record table window contains the following softkeys:
(
Plot/Table Settings
) softkey is used for adding of a table;
(
Update table
) softkey updates table data;
(
Move
) softkey is used for table moving (up/down) and swapping (left/right) (see figure H.20);
(
Minimize
) softkey is used for minimizing of the table window;
(
Expand
) softkey is used for expanding of the table window;
(
Close
) softkey is used for closing of the table window.
Press
softkey to select particular record. The charts will be scaled according to the record duration.
H.4.5
Addition of Tables and Custom Charts
(
Add plot/table/...
) softkey is used for addition of charts/tables and setting plot parameters.
Go to tab to which new chart/table will be added. You can also select empty tab.
Press “Add plot/table/...” softkey and in the opened window select required chart or table:
– Time series plot;
– Position plot;
– Event table (is included in the default set of charts and tables);
– Record table (is included in the default set of charts and tables).
4.1. When you select “Time series plot” item a window in which data and sensor parameters are selected for the charts
will appear (see figure H.23).
In the opened window:
337
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
