NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 24 / 348

NAVIS NavDP 4000. Operation Manual
For the NAVIS NavDP 4000 system without built-in Autopilot mode the Mode Selector has three positions:
DP — Control is transferred to the DP control system.
IJ — Control is transferred to the IJ control system.
OFF, Manual or Bridge — NAVIS NavDP 4000 is not controlling the vessel.
2.2 Operator Stations
Operator Station (OS) comprises the following components, usually console mounted (an example of console is shown
in Figure 2.5):
– LCD with touchscreen. The touchscreen monitor is used for selecting control modes, enabling and disabling sensors
and position reference systems, entering data, and displaying all the information concerning the system operation
and the vessel behavior.
– Control Computer
– The Main Control Panel (MCP) is used for controlling the vessel manually by means of the joystick and rotary
knob, alarm acknowledging, control transfer, and controlling the vessel is a number of simplest operational modes.
– Portable control panel (PCP) is used for controlling the vessel manually by means of the joystick and rotary knob,
alarm acknowledging, control transfer, and controlling the vessel is a number of simplest operational modes.
– Alarm Speaker. Alarm speaker is used for audible alarms.
– Junction Box.
Figure 2.5: An example of DP Consoles
The Operator Station performs the following functions:
– Operator-DP interaction control via touchscreen LCD, control panel with joystick, knob and LED indicators
– Generation of sound alarms and voice announcements
– Interaction with Control Unit
– Other functions
23
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”