NAVIS NavDP 4000. Operation Manual
Figure 8.15: Dialog box in Auto Position Mode
In Auto Position Mode
(figure 8.15):
If you choose “Hold” (hold position) current position will be set as new position setpoint.
If you choose “Move” — old positioning setpoint will be stored and ship will move to this point.
In Low Speed Track Mode
(figure 8.16):
Figure 8.16: Dialog box in Low Speed Track Mode
If you choose “Yes” — System will switch to Auto Pos mode
Else ship will jump on a map, mode will Low Speed Track, and track will be without changes.
In High Speed Track Mode
(figure 8.17):
Figure 8.17: Dialog box in High Speed Track Mode
If you choose “Yes” — System will switch to Auto Heading mode Else ship will jump on a map, mode will High
Speed Track, and track will be without changes.
8.8.3.2
Median Test
Press
Reject/Warning
softkey to select action type for median test:
Reject
Reject drifting ref-system (with pre-alarm)
Warning
Alarm only for drifting ref-system (with pre-alarm)
Press
Off/Low/High
softkey to select strategy for median test:
Off
Median test is off
Low
Reject ref-sensor when drift exceeds 2 x its accuracy
High
Reject ref-sensor when drift exceeds its accuracy
Reset button resets estimated drift to 0 (“restart median filter”).
149
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
