NAVIS NavDP 4000. Operation Manual
7.3.5.4
Variable draft function: no draft sensor
When there is no draft sensor connected to the
NAVIS NavDP 4000
, but variable draft function (option) is turned on,
the top of the Draft Sensor window is shown in Figure 7.21.
Figure 7.21: Draft info. No draft sensor, variable draft function
In this case, used data is manually inputted data, if they are correct.
7.3.5.5
Variable draft and loading graphs
The following graphs are provided for draft info (Figure 7.22):
– Loading (raw data, processing results)
– Draft (raw data, processing results)
Figure 7.22: Draft sensor. Graphs
7.3.6
Tension Details
7.3.6.1
Tension detailed data
In general, tension sensor measures cable/pipe/other tension force in specified point.
Detailed data includes:
– Sensor softkey with indicators;
– Force measurement – raw data (if they are measured by sensor);
– Force manual value;
– Azimuth and elevation manual values.
NOTE!
Azimuth angle is horizontal force angle measured from Center Lateral
Plane, clockwise (zero is force ahead, 180 degrees is force astern). Ele-
vation angle is vertical force angle, positive means force upwards, neg-
ative is downwards, zero - horizontal.
Processed results include:
137
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
