Ripwave Monitor Software Installation
1. Shut down all programs before installing the Ripwave Monitor software.
This includes all anti-virus software.
2. Insert the Navini Networks Ripwave Installation CD in the CD-ROM
drive.
3. Click
Start > Run
from the menu at the bottom left corner of your
screen. In the
Run
window, enter e:\setup (where “e” represents the CD
drive; use the letter representing your specific CD drive) in the Open
field. Click
OK
.
4. Follow the instructions for the ‘Ripwave Monitor Installation Wizard’ to
install the Ripwave Monitor software.
5. Restart the computer. When the system is up, log in to the computer and
open the Web browser.
6. LET IT RIP…BEGIN SURFING THE INTERNET!
Copyright
2001, 2002 Navini Networks, Inc. All rights reserved. Printed in the USA. Navini Networks, Internet
at the Speed of Thought, Zero-Install, Ripwave, and Unwired by Navini are trademarks of Navini Networks, Inc.
Other product and company names mentioned herein may be trademarks and/or service marks of their respective
owners.
Ripwave
CPE
Quick Installation Guide
Product Release 1.16
Parent Number 95-00116-00
Part number 40-00112-00
Sub-part number 40-00098-00
Revision C Version 1.0
July 31, 2002