2. Installation
The NL-622MP is designed for mounting on a trunk lid, car roof or on a boat. For this purpose,
you must choose a mounting location, where the material is hard enough to absorb the pressure
applied to the receiver, without denting in. Otherwise the rubber gasket on the mounting surface
would not seal completely any more, and water might penetrate. The mounting examples shown
for various situations provide maximum reception, since it is not hindered by the vehicle (e.g. by
a window pane).
Do not carry out the mounting yourself, but rather let it be done by a specialist shop. If you carry
out the mounting yourself, you may void the warranty. Please ask your dealer to what extent the
personal mounting might influence the warranty and if it is necessary to have this work done by a
specialist in order to keep the warranty.
Navilock is not responsible for wrong mounting, because we recommend that this should be done
by a specialist. This is the reason we don’t offer any mounting instructions here. An experienced
car repair shop has the expertise necessary to carry out the mounting.
3. Starting operation, e.g. with an USB adapter cable (article number 61264)
3.1.
Plug the USB cable into a free USB port on your notebook etc., and connect it with the
NL-622MP. The NL-622MP will be recognized by your Windows operating system, which will
attempt to install a driver. Abort this process, and start the driver installation of the USB cable
from the CD-ROM, or download the driver from the Navilock website. Follow the installation
instructions. After the installation is completed, re-start your computer. Then the GPS COM
port will be available in the Device Manager under Connections. Set this port in your
navigation or route planner software. Do not use another program which accesses this port at
the same time.
Содержание NL-622MP
Страница 1: ...NL 622MP operation manual 61843...
