Navilock NL-130BK, Руководство пользователя

Страница: 18 / 23

18
e) GPX format files can also be imported and displayed by the NaviSport Bike Tool.
8) The NL-130BK has an odometer that shows the total distance covered to date. This odometer can
be reset using the NaviSpart Bike Tool. Click Tools, then click “Setting the total device distance.”
9) A window opens in which the 5 digits before the decimal point can be set. For example you can set
00010 for a distance of 10km, or for a reset, 00000 for zero km. This allows the bicycle computer to
be used by several people who can record their individual total distances covered.
10) Confirm the entry by clicking OK. Disconnet the NL-130BK USB cable to turn the device off. Turn it
on again and you will see the setting you have just made on the total distance display.
12. Firmware update
12.1 Procedure
1) With time, new functions or corrections may be included in the firmware. In order to avoid sending
the device in for service, there is a simple way to install the new firmware.
2) NEVER USE FIRMWARE THAT HAS NOT BEEN RELEASED BY NAVILOCK FOR THIS
DEVICE. IF YOU DO THE FUNCTIONABILITY OF THE DEVICE MAY BE IRREPARABLY
DESTROYED.
3) Proceed as follows: Download the new firmware from the Navilock website, and save it to your
hard disk.
4) Under Tools, open the Update Device firmware function.
5) A warning is displayed, informing you that all the data on the device will be irretrievably lost. If there
are still tracks remaining on the device, save them first.