Industrial Cellular VPN Router NR500 Series User Manual
Page 43 / 70
•
Local Port
Sets the LAN port number range used when forwarding to the destination IP address.
Firewall->DMZ
•
Enable
Check this box to enable DMZ function.
•
Remote Address
Optionally restricts DMZ access to only the specified WAN IP address.
NOTE:
If set to 0.0.0.0/0, the DMZ is open to all incoming WAN IP addresses.
•
DMZ Host Address
The WAN IP address which has all ports exposed except ports defined in the Port Forwarding
configuration.
Firewall->NAT
•
Description
Enter a description of 1-to-1 NAT setting.
•
Interface Address
Specify the interface address that need to be accessed before NAT.
•
Host Address
Specify the host address that need to be accessed after NAT.
•
Interface To Address
Specify the interface that connected to host, like lan0, lan1, lan2, lan3.
